Your best-ever at-home manicure
BioGlow pairs our premium, high-wavelength LED lamp and cutting-edge hybrid formulas free of unhealthy monomers. It cures fast, hard and with a dazzling, glossy finish - all while remaining kind to nails.
How to apply
The perfect BioGlow manicure in 4 easy steps
1·Primer
Apply to all 10 nails and air-dry for 15 seconds - no lamp needed.
2·Base Coat
Apply one thin layer to all 10 nails. Cure each hand under the LED lamp for 1 minute.
3·Colour
Apply one thin layer to all 10 nails. Cure each hand for 1 minute & repeat for coat two.
4·Top Coat
Apply one thin layer to all 10 nails. Cure each hand for 2 minutes. Allow 5 minutes to fully harden.
EASY, GENTLE & SAFE REMOVAL
No acetone soaking. No filing. Off in 5 minutes.
- 1
Soak a halved cotton pad in BioGlow Nail Polish Remover.
- 2
Press pad onto nail, then hold in place with the nail clips provided. Repeat for all nails.
- 3
Leave for 5 minutes, then remove - wiping each cotton pad from cuticle to tip.
“Twelve days on and my nails still look freshly done. The first gel-style manicure that hasn't wrecked my nails coming off.”
Salon quality, kitchen table
The four steps are foolproof and the lamp timings take the guesswork out. Ten days of wear on my first attempt - not a single chip.
The removal is the revelation
Clips on, five minutes, done. No acetone baths, no scraping. My nails feel exactly as healthy as before the manicure.
Worth it for the set
Beautiful box, beautiful shades — Noirberry is stunning. Wish there were more colours at launch, but the system itself is flawless.
Top-up your BioGlow
Every piece, on its own.
Our BioGlow products are available to buy separately, making replenishing your manicure easy.
Support
Frequently asked.
Answers to the most common questions about our BioGlow manicure. If your BioGlow question isn’t here, contact our friendly Customer Services team on cs@nailberry.co.uk
Can I use my other Nailberry polishes with BioGlow?
No. Only our BioGlow base coat, colours and top coat need to be cured under our LED lamp. Our L’Oxygéné nail polishes and treatments are all air-drying.
Can I use other brand polishes with BioGlow?
No. Our BioGlow hybrid formulas are unique and our LED lamp is designed to work with this system for best results.
What’s the difference between your L’Oxygene and BioGlow formulas?
BioGlow L’Oxygéné
Bio-sourced ✓ ✓
Toxin-free 25-free 21-free
Natural origin ingredients 65-73% 75%
Oxygenated x ✓
Days wear 12+ 5-6
How to dry LED lamp Air dry
Removal Acetone-free Acetone-free
Colours 3 (& growing!) 80+
Routine timings* 30 mins 30 mins
I’ve never used an LED-curing polish before. Is BioGlow tricky?
No. You apply our BioGlow primer, colours, base and top coats in the same way you would regular nail polish. The only difference is that you cure your manicure under our LED lamp, rather than letting it air-dry.
Does BioGlow contain TPO?
No. All our BioGlow formulas are free of TPO (Trimethylbenzoyl diphenylphosphine oxide) and other unhealthy monomers, including HEMA.
How long does it take to do the full BioGlow manicure?
The total time is around 30 minutes, though this can vary depending on personal technique.
How is the BioGlow LED lamp different to others?
The spec of our 48W BioGlow LED lamp is significantly higher than most at-home curing lamps. It emits power at a wavelength of 365 + 405 nm / power radiant: ≥30 mW/cm² which, along with the higher wattage, delivers salon-quality fast and even curing, including edges and sidewalls, while reducing the risk of peeling and chips.
Does the BioGlow LED lamp get hot?
The LEDs in our lamp are quartz glass encapsulated which greatly improves performance and experience and reduces heat build-up, ensuring it is safe and effective for your nails. During the 1- and 2-minute curing times, heat does not build up or feel uncomfortable on nails.